MWT-PBSET01 - Pookie Buster

Set includes one 1/4" & 5/16" bit Quickly Removes Hex Head Screws Covered In Pookie Broach Cut Magnetic Impact Nut Driver One Step & Done




MIDWEST MWT-PBSET01 Pookie Buster Set includes one 1/4 and one 5/16 broach cut magnetic hex nut driver. The Pookie Buster is a magnetic hex nut driver with a patented broach cut that eliminates the unnecessary extra work needed to remove mastic, caulking, tape or any other type of “pookie” that is coving the hex head of a screw. The bits are meant to be used as a standard magnetic nut driver but when faced with several screws coated in “pookie”, the specialty designed broach makes easy work of removing the material so time is not wasted. Another benefit is reaching coated screws in tight areas where one cannot manually reach. Traditional bits were not designed to remove coated over screws, making the Pookie Buster far superior than all of them.

Lower drill speeds increase longevity.
Keep tip clean using a small screwdriver, knife or a pinpoint screw.


Contact Us

    Midwest Tool & Cutlery Co.
    PO Box 160
    1210 Progress Street
    Sturgis, MI 49091 USA
    Toll Free Number:
    (800) 782-4659

(269) 651-7964
Email Midwest:
(269) 651-4412